RCJ18 Flush-mounted dimmer for LED strips
With the RCJ18, LEDs or LED strips with a supply voltage of 12-48 V DC can be dimmed or switched wirelessly.
The supply voltage corresponds to the voltage at the dimmed output, which can be loaded with up to 8 A.
Operation takes place via up to 32 Easywave wireless transmitters or an external button.
Dimming can be carried out either with or without memory function.
As an alternative, each transmitter can be assigned its own fixed dimming value.
The supply voltage corresponds to the voltage at the dimmed output, which can be loaded with up to 8 A.
Operation takes place via up to 32 Easywave wireless transmitters or an external button.
Dimming can be carried out either with or without memory function.
As an alternative, each transmitter can be assigned its own fixed dimming value.
Technical specifications
Coding | Easywave Up to 32 transmitters can be programmed. POTA (only 2-button operation) |
Frequency | 868,30 MHz |
Channels | 1 |
Power supply | 12-48 V DC SELV |
Power Consumption | 0,5 W standby |
Connected load | max. 384 W at 48 V DC |
Output load | LED strips up to 8 A |
Operating modes | dim with memory (2- and 1-button operation) dim w/o memory (2- and 1-button operation) dim by external button (1-button operation) control fixed brightness levels (2- and 1-button operation) |
Input | external mechanical button |
Outputs | electronic switch |
Operating temperature | 0 °C to +40 °C |
Dimensions | 48 x 48 x 25 mm |
Scope of delivery
- Flush-mounted dimmer
- Operating manual
Models
Product numbers | Description |
---|---|
RCJ18E5001A01-23K | Flush-mounted dimmer, Easywave, 12-48VDC, 1x dimming (LED strips), potential-loaded, button input |
Wiring diagram
![](../_pics/empfaenger/rcj18e_w.jpg)
Instagram
LinkedIn