Homepage
The bidirectional RCJ33 flush-mounted receiver is designed for switching low-voltage devices with a potential-free changeover contact. Up to 32 transmitters can be programmed.

In addition, a button input is available for local wired operation.

Programming is simply done on the device by pressing a button or via radio using remote programming (POTA).

In addition to the ON/OFF function, the operating modes LOGIC, DEADMAN and TIMER (adjustable from 1 second to 30 hours) can be used.

The flat design facilitates installation in flush-mounted sockets, behind switches or behind sockets.


RCJ33EN5001A01-K
Technical specifications
Coding Easywave neo
Up to 32 transmitters can be programmed
POTA
Frequency 868,30 MHz
Channels 1
Power supply 12-24 V AC
12-32 V DC
Power consumption
(at 24V AC)		 0,2 W standby
1,0 W relay switched (without load)
Operating modes ON/OFF (2-button operation)
ON/OFF (1-button operation)
TIMER (adjustable)
LOGIC
DEAD MAN
Input 1 external button
Output 1 potential-free relay contact (changeover)
Maximum contact load
AC:


DC:
NC: 120V / 6A / 720VA
NO: 120V / 10A / 1200VA

NC: 30V / 6A / 180W
NO: 30V / 10A / 300W
Operating temperature -20 °C to +45 °C
Dimensions (W/L/H) 43/42/17,5 mm
Scope of delivery
  • Flush-mounted receiver
  • Operating manual
Models
Product number Description
RCJ33EN5001A01-K Flush-mounted receiver, Easywave neo, 12-24V AC / 12-32V DC, 1x changeover, potential-free, button input
Wiring diagram