Transmitter Module RTM08
The Transmitter Module RTM08 is a standalone device designed for transmitting a maximum of 16 different digital states.
It requires a permanent voltage supply of 5 V DC.
The integrated micro controller carries out all necessary important functions for the transmission process. The maximum transmission time is 36 seconds.
On a state of change on PIN 3 (High), a telegram according to the coding on PIN 4-7 is transmitted. This signal can be used for all operation modes of Easywave-receivers, except for the UP/STOP/DOWN mode.
The integrated micro controller carries out all necessary important functions for the transmission process. The maximum transmission time is 36 seconds.
On a state of change on PIN 3 (High), a telegram according to the coding on PIN 4-7 is transmitted. This signal can be used for all operation modes of Easywave-receivers, except for the UP/STOP/DOWN mode.
RTM08E5008-01-00EP
Technical specifications
| Coding | factory coding with Easywave telegram |
| Conformity | EN 300 220 |
| Channels / Frequency | 8 / 868,30 MHz |
| Range | up to 100 m under favourable open field conditions |
| Power supply | 5 V DC |
| Current Consuption | standby: approx. 1,5 mA transmission: approx. 13 mA |
| Operating temperature | -20 °C to +60 °C |
| Dimensions (W/L/H) | 40/22/5,8 mm, Grid: 2,54 mm |
Scope of delivery
- Transmitter Module
- Operating manual
Models
| Product number | Description |
|---|---|
| RTM08E5008-01-00EP | Transmitter Module 8-Channel, 5 V |
Connection DiagramTransmission Codes
| Group | Code | X | Y | Z | W |
| 1 | A B | 0 0 | 0 0 | 0 0 | 0 1 |
| 2 | A B | 0 0 | 0 0 | 1 1 | 0 1 |
| 3 | A B | 0 0 | 1 1 | 0 0 | 0 1 |
| 4 | A B | 0 0 | 1 1 | 1 1 | 0 1 |
| 5 | A B | 1 1 | 0 0 | 0 0 | 0 1 |
| 6 | A B | 1 1 | 0 0 | 1 1 | 0 1 |
| 7 | A B | 1 1 | 1 1 | 0 0 | 0 1 |
| 8 | A B | 1 1 | 1 1 | 1 1 | 0 1 |
Instagram
LinkedIn